鋼結(jié)構(gòu)廠房環(huán)境差對企業(yè)的影響：

Steel structure plant is a steel structure, although the floor slab is very high, there is also a thermal insulation effect, but in the summer workshop is still sweltering and unbearable, workers work in it sweating is very uncomfortable, serious heat stroke phenomenon often occurs.

Cooling system of steel structure plant - environmentally friendly air conditioner:

Eco-friendly air conditioning is a set of ventilation. Cooling. Air exchange. Dust removal. Deodorization in one of the factories. Workshop cooling equipment, 5 minutes can quickly cool down 5-10 degrees, 100 square meters of 1 hour electricity, is a good equipment required by small and micro enterprises.

Its core component is a direct evaporative heat exchanger, a wet curtain, which is a specially treated 509 type "multi-layer corrugated fiber superimposed" special paper honeycomb structure material (5090 that is, the wave height is 5mm, the corrugation is 90 degrees staggered), which has good water absorption performance and ventilation performance.

The wet curtain surface does not contain activators, has a natural water absorption function, spreads quickly and has a long-lasting effect. The evaporation surface of the wet curtain paper is larger than the surface, the actual heat transfer area is close to 100 times that of the surface, the texture is strong, the water immersion resistance, the deformation is not deformed, and the corrosion resistance is resistant.

The steel structure workshop has a large area and high height, how to cool down in the workshop? The steel structure workshop is easy to gather heat in summer, the workshop temperature is higher, and in the hot summer, the workshop temperature is even higher than the outdoors. To solve the problem of ventilation and cooling in the sweltering workshop, it is necessary to make the workshop well ventilated and increase the number of workshop ventilation. The air in the workshop is naturally cool.

1. The cooling effect is very strong: in high temperature areas, the cooling effect of the machine can generally reach 4-10 ° C, and the cooling is fast.

2. Strong wind. Wind transmission distance: The maximum air volume per hour can be selected according to user needs 18000-60000m3.

Stable performance: the use of 100mm thick 5090 cooling wet curtain, strong cooling ability, the use of three-leaf forward swept axial wind blades, low noise, high efficiency.

4. Save energy: Install one for every 100-150 square meters of area, only 1 kWh of electricity is required.

5. Energy saving: The energy consumption is only 1/8 of the energy consumption of traditional air conditioners.

6. Not limited by the environment: open or semi-open workshop can be used.